We will now add a label to the one of the wires and set the label location.
To change the wire Label, Click the Inspect icon and then the control node or wire you wish to label (Wire08)
Under Wire ID change to FOG CIRCUIT 2.
You can change the wire label location of all wires in the project by clicking the wirelabel above , wirelabel inline or wirelabel below icons.
In addition to the wire label options above it is also possible to use the new "Wire Label Ops" tools:
Clicking the button will erase all existing wire labels as shown in the image below:
Drawing a wire label line across intersecting wires
Note: this function can also be used on a elected area if you do not want to remove all labels on the sheet.
Using the tool drawing a horizontal line across the unlabeled wires will add labels neatly along the line as shown:
wire label line drawn alongside RLY-001
resulting wire labels
If you would like to be shown which wires you have not yet labelled click the tool. A dialogue will allow you to filter certain types of wires if required such as PCB tracks and fly-leads. * shows all items, click submit to display.
wires without labels options
Highlighted wires with no label
The unlabelled wires will highlight orange to identify which remain to be labelled on your current sheet
and then the control node or wire you wish to label (Wire08)
, wirelabel inline
or wirelabel below 
icons.
button will erase all existing wire labels as shown in the image below:
tool. A dialogue will allow you to filter certain types of wires if required such as PCB tracks and fly-leads. * shows all items, click submit to display.
