Next we will add 2 new connectors to our Component database, A square with 6 cavities and a Circular with 5 cavities.
From the Home menu (Fig 26.1) select Component DB (Fig 26.2) next select Quickstart (Fig 26.3)
Fig 26.1 Home Menu
Fig 26.2. Component Database Select button Fig 26.3. Quickstart Select button
Click the Connectors 
tab then Add New Component 
Add the following details to the Add new connector screen (Fig 26.4)
Description : Square 6 Cavities
Colour : Blue
Family : Blank
Status : IN REVIEW
Part Number : 0-1234567-9
Type : Supplier
Company CADONIX
Fig 26.4. Add new Connector properties screen
Click Create New Component 
to add it to your database.
Next we will add a Circular with 5 cavities.
From the Home menu select Component DB (Fig 26.5) next select Quickstart (Fig 26.6)
Fig 26.5. Component Database Select button Fig 26.6. Quickstart Select button
Click the Connectors tab then Add New Component
Add the following details to the Add new connector screen (Fig 26.7)
Description : Circular 5 Cavities
Colour : GRAY
Family : Blank
Status : IN REVIEW
Part Number : 0-12345678-9
Type : Supplier
Company CADONIX
Fig 26.7. Add new Connector properties screen
Click Create New Component to add it to your database.
In the new Connector record configure some details for the connector for example the number of cavities it has, in this example we are setting 5.
You may upload images for the connector at this point or we can create a "Generated View" for the connector using the View generator described separately in the next section.
Select terminals to fit your connector, they can be selected form the existing examples available in the Quickstart database:
Fig 26.8. Select Load From Database
Fig 26.9. Select Load From Database
Select a range of terminals that you would like to link to the connector with differing wire ranges and select 
to save your new connector.
