You will now add the splice you created within the Component Database section,
If you Naviagte/Find to SP-003 in the harness & Inspect the Splice, a new Dialog box will appear, Here you can see the the Splice Technology has already been entered as Mechanical (Use the drop down menu if you wish to change this).
If you search a Part number 2140016 this will be filtered by this Splice Technology (Fig 42.2)
Fig 42.1 Splice Dialog menu
Now you can click Populate to select this Splice.
Fig 42.2 Search
We can now run the Wire Route command in order to change the wire orientation within the Splice & Finally Right click the Splice to Toggle Splice Image (Fig 41.3)
Fig 42.3. Toggling on the Splice Image is a key visual aid.
Tip: You can select the Default Splice Technology from the first point of creating your harness, This means Arcadia will configure your splices this way from the get go
Fig 42.4 Select the Default Splice Technology when inputting the Harness Information.
the Splice, a new Dialog box will appear, Here you can see the the Splice Technology has already been entered as Mechanical (Use the drop down menu if you wish to change this).
to select this Splice.
command in order to change the wire orientation within the Splice & Finally Right click the Splice to Toggle Splice Image 
