The clocking angle tool can be used for a multitude of components including Connectors, clips and Bundle Branches.
You will now add a Clocking Angle to one of the connectors. To add a Clocking Angle click on the Clocking Angle command (Harness Tab) and click on connector X-002's control node to place a clocking anglefor the connector (Fig 48.1). You can right click and switch between different representation of the clocking angle before left clicking to place it.
Fig 48.1. Placed Clocking angle tool
Set the in the Clocking Angle Properties windows set the Keyway Angle to 30° (this setting makes the connector pairs unique so they cannot be connected to the incorrect mating half for Military and Motorsport Harnesses). Set the Backshell angle to 90° this adds a 90° L bend to the connector (Fig 48.2). Click submit to add the Clocking angle to the Harness Drawing (Fig 48.3).
