The traffic light status will be on the advanced toolbar in Harness, that change it status to RED, AMBER or GREEN as we do the design. Clicking this Icon will load the below checks & the status on the right-side POP-UP.
Fig 52 Traffic Light System
Fig 52.1 Traffic Light System Summary
There will be a set of new macros introduced that can be used within the Harness drawing/frames to give the status in the drawing.
Schematic Sync - Show Schematic Name & Revision. This info is already saved. If any manual edit of wires happens in Harness, the macro should display “Manual”.
Route Status - If Wire route has been updated. Yes/No. Please note that if there is any operation performed on the harness that would change the wire route like insert node, insert bundle, the status will be updated appropriately
