Use the Design Rule Check command on the toolbar to perform number of checks to help ensure the harness is ready for manufacture. The checks are grouped into sections to make it easier to read - take a moment to look at the analysis at this stage. Warnings associated with terminal and seal selection are also displayed.
Fig 55 Design Rule Checks
Close down the Design Rule Check pane to head back to the fog lamp harness.
Fig 55.2 The Fog Lamp Harness
The Print command allows the Harness to be printed in colour or monotone. This will generate a new window with your schematic available as a PDF or to be printed directly. You can select to print the Entire sheet or Print by Zone, Also if you highlight a selected area you can print a specific area.
on the toolbar to perform number of checks to help ensure the harness is ready for manufacture. The checks are grouped into sections to make it easier to read - take a moment to look at the analysis at this stage. 
command allows the Harness to be printed in colour or monotone. This will generate a new window with your schematic available as a PDF or to be printed directly. You can select to print the Entire sheet or Print by Zone, Also if you highlight a selected area you can print a specific area.