Now you will navigate back into the Quick Start Complete Harness to draw a new harness using the Quick Add functions, you will input the Bundle Layout, Covering, Junction Piece & Connector that includes a Backshell.
The connector that will be used in this example has been set up for your use within the Quickstart Library and already has the Base-Point's set for the Connector and Backshell, Within this example you will see how quickly it is to create a harness using the Quick to Add functionality.
Draw a T shaped Harness below the Quickstart Harness Frame with the dimensions shown on the image below (Fig 61.1)
Fig 61.1 Draw the Harness Layout to lengths shown
Now you will Right Click the bundle and use the Add Covering 
function and assign the part numbers to the Bundles (See Fig 54.2.1, 54.2.2):
Part Number: 1967753
Description: UNSLIT CONDUIT NW 13/UFW PP-BS
Part Number: 1967753
Description: UNSLIT CONDUIT NW 13/UFW PP-BS
Part Number: 1967750
Description: UNSLIT CONDUIT NW 10/UFW PP-BS
Fig 61.2.1: Right click to Add Covering will take you to Coverings library.
Fig 61.2.2: Please note the part numbers used for each branch of our Harness Layout.
Now you have assigned the Bundles with the Covering (13-10-13) you will now assign a Junction Piece from the Quickstart Library:
Part Number: 9806101
Description: TPEICE 13-10-13
Fig 61.3: Right click to add any additional components to the Node.
Press enter, as this is the only component with this part number it will automatically assign the component to the node and place the Junction Part in the correct orientation of the bundle.
Now you will assign a Connector and enable to display the Backshell within the Attached Parts.
Part Number: 12345605
Description: PLUG_31WY_HDP20_BK_SLD_FEM TERMS
Attached Part Number: HD30-24BT-BK
Attached Description: BOOT ST_HDP20-HD30_PLUG_RECP_SHELL SIZE 24_BLACK
Fig 61.4: Press enter to search the component, If the part number does not exist you will be prompted, If there are multiple then they will appear within the search, If there is only One example this will be automatically selected to reduce any additional clicks.
Fig 61.5 : Tick the option to include the attached part & then press Submit.
Fig: 61.6 Tip: Use CTRL before clicking the Connector Image to move the Image by the Centre Point.
You have now completed the Quick to Add Function Guide.
Fig 61.7 : If you wish to adjust the scale of these items you can do so by Right Clicking the Image and adjusting the scale by a numerical scale, Or you can select the move 
function and scale the item by hovering over the image and selecting the adjust scale icon
and scaling with your Mouse movement.
