You will now inspect the Bundle and add a covering, To add covering there are two different methods
1. Click the icon then click on the Bundle,
Fig 34.1 Inspect Bundle
The Bundle Properties appears. Under the section Insulation Part Numbers, use the Covering drop-down list and select conduit_slit (Fig 34.1).
2. You can Right Click the bundle to quick add Covering from your Library.
Fig 34.2 Right click menu for Bundle
Note: It is possible to add a part number for the covering from the Bundle Properties Pane.
On the Bundle Properties or when using the right click function, you will also set the bundle Set Length as 200.
Click Submit Or Hit Enter (If adding length from right click menu). The drawing updates with the Not To Scale (NTS) length added along the bundle.
Note: You can change a Not To Scale (NTS) bundle to become To Scale. Click the Fix Bundle Length command. Then click on a NTS bundle. Next, click on the Harness Node at the end of the bundle in the direction you wish the bundle to adjust. The bundle will now adjust to become To Scale.
icon then click on the Bundle,
command. Then click on a NTS bundle. Next, click on the Harness Node at the end of the bundle in the direction you wish the bundle to adjust. The bundle will now adjust to become To Scale.